Nuclear fuel is generally any material that can be ‘burned’ by nuclear fission or fusion to derive nuclear energy. There are many design considerations for the material composition and geometric configuration of the various components comprising a nuclear fuel system. Common nuclear reactors use an enriched uranium and plutonium as a fuel.
Generally, there are two types of nuclear fuel cycles (for PWRs):
- Uranium fuel cycle. Uses an enriched uranium fuel (~4% of U-235) as a fresh fuel. During the fuel burning, the content of the U-235 decreases and the content of the plutonium increases (up to ~1% of Pu ).
- Thorium fuel cycle. Uses a thorium – 232 as a fertile material. During the fuel burning, the Th-232 transforms into a fissile U-233.
PWR nuclear fuel assembly
Pressurised water reactors (PWRs) are the most common type of nuclear reactor accounting for two-thirds of current installed nuclear generating capacity worldwide. Most of PWRs use the uranium fuel, which is in the form of uranium dioxide. Uranium dioxide is a black semiconducting solid with very low thermal conductivity. On the other hand the uranium dioxide has very high melting point and has well known behavior. The UO2 is pressed into pellets, these pellets are then sintered into the solid.
These pellets are then loaded and encapsulated within a fuel rod (or fuel pin), which is made of zirkonium alloys due to its very low absorbtion cross-section (unlike the stainless steel). The surface of the tube, which covers the pellets, is called fuel cladding. Fuel rods are base element of a fuel assembly. The fuel rods and the pellets constitute the first barrier in Defence in depth strategy. The first barrier, which retains radioactive material within the fuel and protect the environment.
The collection of fuel rods or elements is called the fuel assembly. The fuel assembly constitute the base element of the nuclear reactor core. The reactor core (PWR type) contains about 157 fuel assemblies (depending on a reactor type). Western PWRs use a square lattice arrangement and assemblies are characterized by the number of rods they contain, typically, 17×17 in current designs. The enrichment of fuel rods is never uniformed. The enrichment is differentiated in radial direction but also in axial direction. This arrangement improves power distribution and improves fuel economy.
Russian VVER-type reactors use a fuel that is characterized by their hexagonal arrangement, but is otherwise of similar length and structure to other PWR fuel assemblies.
A PWR fuel assemblies stand between four and five metres high,are about 20 cm across and weighs about half a tonne. The assemblies have vacant rod positions for control rods or in-core instrumentation. Control rods, in-core instrumentation, neutron source, or a test segment can be vertically inserted into a vacant tube called the guide thimble.
A PWR fuel assembly comprises a bottom nozzle into which rods are fixed through the lattice and to finish the whole assembly it is ended by a top nozzle. There are spacing grids between these nozzles. These grids ensure an exact guiding of the fuel rods. The bottom and top nozzles are heavily constructed as they provide much of the mechanical support for the fuel assembly structure.
An 1100 MWe (3300 MWth) nuclear core may contain 157 fuel assemblies composed of over 45,000 fuel rods and some 15 million fuel pellets. Generally, a common fuel assembly contain energy for approximately 4 years of operation at full power. Once loaded, fuel stays in the core for 4 years depending on the design of the operating cycle. During these 4 years the reactor core have to be refueled. During refueling, every 12 to 18 months, some of the fuel – usually one third or one quarter of the core – is removed to spent fuel pool, while the remainder is rearranged to a location in the core better suited to its remaining level of enrichment. The removed fuel (one third or one quarter of the core, i.e. 40 assemblies) has to be replaced by a fresh fuel assemblies.
Typical PWR fuel assembly consist of:
- Fuel rods. Fuel rods contain the fuel and burnable poisons.
- Top nozzle. Provides the mechanical support for the fuel assembly structure.
- Bottom nozzle. Provides the mechanical support for the fuel assembly structure.
- Spacing grid. Ensures an exact guiding of the fuel rods.
- Guide thimble tube. Vacant tube for control rods or in-core instrumentation.
Nuclear Fuel Breeding
All commercial light water reactors contains both fissile and fertile materials. For example, most PWRs use low enriched uranium fuel with enrichment of 235U up to 5%. Therefore more than 95% of content of fresh fuel is fertile isotope 238U. During fuel burnup the fertile materials (conversion of 238U to fissile 239Pu known as fuel breeding) partially replace fissile 235U, thus permitting the power reactor to operate longer before the amount of fissile material decreases to the point where reactor criticality is no longer manageable.
The fuel breeding in the fuel cycle of all commercial light water reactors plays a significant role. In recent years, the commercial power industry has been emphasizing high-burnup fuels (up to 60 – 70 GWd/tU), which are typically enriched to higher percentages of 235U (up to 5%). As burnup increases, a higher percentage of the total power produced in a reactor is due to the fuel bred inside the reactor.
Comparison of cross-sections
Source: JANIS (Java-based nuclear information software) http://www.oecd-nea.org/janis/
Uranium 238. Comparison of total fission cross-section and cross-section for radiative capture.
Thorium 232. Comparison of total fission cross-section and cross-section for radiative capture.
Fuel Consumption – Summary
Consumption of a 3000MWth (~1000MWe) reactor (12-months fuel cycle)
It is an illustrative example, following data do not correspond to any reactor design.
- Typical reactor may contain about 165 tonnes of fuel (including structural material)
- Typical reactor may contain about 100 tonnes of enriched uranium (i.e. about 113 tonnes of uranium dioxide).
- This fuel is loaded within, for example, 157 fuel assemblies composed of over 45,000 fuel rods.
- A common fuel assembly contain energy for approximately 4 years of operation at full power.
- Therefore about one quarter of the core is yearly removed to spent fuel pool (i.e. about 40 fuel assemblies), while the remainder is rearranged to a location in the core better suited to its remaining level of enrichment (see Power Distribution).
- The removed fuel (spent nuclear fuel) still contains about 96% of reusable material (it must be removed due to decreasing kinf of an assembly).
- Annual natural uranium consumption of this reactor is about 250 tonnes of natural uranium (to produce of about 25 tonnes of enriched uranium).
- Annual enriched uranium consumption of this reactor is about 25 tonnes of enriched uranium.
- Annual fissile material consumption of this reactor is about 1 005 kg.
- Annual matter consumption of this reactor is about 1.051 kg.
- But it corresponds to about 3 200 000 tons of coal burned in coal-fired power plant per year.
See also: Fuel Consumption
Uranium vs. MOX Fuel – Neutron Flux Difference
Note that, there is a difference between neutron fluxes in the uranium fueled core and the MOX fueled core. The average neutron flux in the first example, in which the neutron flux in a uranium loaded reactor core was calculated, was 3.11 x 1013 neutrons.cm-2.s-1. In comparison with this value, the average neutron flux in 100% MOX fueled core is about 2.6 times lower (1.2 x 1013 neutrons.cm-2.s-1), while the reaction rate remains almost the same. This fact is of importance in the reactor core design and in the design of reactivity control. It is primarily caused by:
- higher fission cross-section of 239Pu. The fission cross-section is about 750 barns in comparison with 585 barns for 235U.
- higher energy release per one fission event. In order to generate the same amount energy a MOX core do not require such the neutron flux as a uranium fueled core.
- larger fissile loading. The main reason is in the larger fissile loading. In MOX fuels, there is relatively high buildup of 240Pu and 242Pu. Due to the relatively lower fission-to-capture ratio, there is higher accumulation of these isotopes, which are parasitic absorbers and that results in a reactivity penalty. In general, the average regeneration factor η is lower for 239Pu fuel than for 235U fuel. Therefore the MOX fuel requires a larger fissile loading to achieve the same initial excess of reactivity at the beginning of the fuel cycle.
The relatively lower average neutron flux is MOX cores has following consequences on reactor core design:
- Because of the lower neutron flux and the larger thermal absorption cross section for 239Pu, reactivity worth of control rods, chemical shim (PWRs) and burnable absorbers is less with MOX fuel.
- The high fission cross-section of 239Pu and the lower neutron flux lead to greater power peaking in fuel rods that are located near water gaps or when MOX fuel is loaded with uranium fuel together.
We hope, this article, Nuclear Fuel, helps you. If so, give us a like in the sidebar. Main purpose of this website is to help the public to learn some interesting and important information about physics and reactor physics.